What are the steps in the machining of hardware fittings?

First, before entering the workplace, all employees should check whether their clothing meets the work requirements. No slippers, high heels or clothing that affects safety are allowed, and those with long hair should wear a helmet. Maintain the correct posture when working, have sufficient spirit to cope with the work, if you find that you are not feeling well, you must immediately leave the workplace and reflect to the leadership. Operation must be concentrated, gossip is strictly prohibited, cooperate with each other, the operator must not operate in a state of irritability, fatigue, to avoid accidents, to ensure operational safety.

Second, check whether the moving part of the machine is filled with lubricant before work, then start and check whether the clutch, brake is normal, and the machine will be airborne 1-3 minutes, mechanical failure is strictly prohibited when operating.

Third, when replacing the mould first turn off the power, punching machine movement department to stop running, before starting to install, debug the mould. After installation and adjustment, move the flywheel by hand for two test punches to check whether the upper and lower dies are symmetrical and reasonable, whether the screws are strong and whether the crimp circle is in a reasonable position.

Four, must wait for all other personnel to leave the mechanical work area, and take away the workbench debris, before starting the power to start the machinery.

Fifth, after the machinery is started, by a person to transport and mechanical operation, others may not press the electric construction or foot pedal switch plate, not to mention the hands into the mechanical work area or touch the moving part of the machinery with their hands. When the machine is working, it is forbidden to put your hand into the working area of the ram, and it is strictly forbidden to take or put the workpiece by hand. When picking up or placing workpieces in the die, standard tools must be used. If abnormal sound or machine malfunction is found, the power switch should be turned off immediately for inspection.

Sixth, at the end of the day, the power supply should be turned off and the finished products, trimmings and miscellaneous items on the job should be sorted out to ensure a clean and safe working environment.

The above operating procedures must be consciously complied with, do not violate the operation, failure, should cooperate with maintenance personnel to overhaul, an accident immediately cut off the power supply, keep the scene reported to the plant waiting to be dealt with, violation of operating procedures caused by all the consequences, the person concerned to bear all the consequences

Hardware processing is the raw materials (stainless steel, copper material, aluminum material, iron material. .....) We use lathes, milling machines, drilling machines, polishing machines and so on to process various parts according to customers' drawings or samples, such as: screws, motor shafts, model car parts, fishing accessories, speaker product shells, mobile power shells, etc.